Kronendeath1664 0 Posted October 9, 2019 great work, but will it have the xbox crossplay feature, and if it already does how would i go about using it? Share this post Link to post Share on other sites
lolman2079 4 Posted October 10, 2019 Hi @Cpt. BlackOrBit möchtest du eine neuinstallation machen oder hast du schon einen Server? Wenn du einen neuen Server installieren willst mit deinem eigenem ServerGrid musst du auch "New Installation" und dann den Serverpfad auswählen. Wenn der Server dann heruntergeladen ist musst du ein Standard ServerGrid auswählen (Ich würde 2x2 nehmen ist ja nur Temporär). Dann vergibst du deinem Server den Namen, RCON Passwort und die Ports und dann öffnet sich das Tool. Sobald das fertig ist schließt du das Tool und Kopierst dein ServerGrid.json (inkl. dem Ordner usw.) in das Verzeichnis des Servers unter ShooterGame. Dort müssten schon ein ServerGrid.json drin sein. Die überschreibst du einfach mit deiner sowie ServerGrid.ServerOnly.json. Dann kannst du das ASC wieder öffnen und schauen ob es schon dein neues ServerGrid übernommen hat. Falls nicht, drück Links auf Service Menu und Reload ServerGrid und wähl das ServerGrid aus was dir da direkt vorgeschlagen wird. Danach kann es sein das du ASC neustarten musst und nochmal das gleiche durchführen musst (Also Service Menu, Reload ServerGrid). Danach würde Ich es noch einmal neustarten und dann kannst du über Cluster Shards die Ports von deinen anderen Grids noch einstellen. (A1, A2, B1, B2 müssten schon richtige Ports haben aber die anderen nicht) 1 Share this post Link to post Share on other sites
Cpt. BlackOrBit 0 Posted October 12, 2019 Hi @lolman2079 Erstmal vielen dank für deine Hilfe, das hat mir echt schon geholfen aber ich habe immer noch hier und du ein paar Probleme die einfach nicht wollen. Wenn du mal zeit hast zu helfen via TS3 usw, dann schaue gerne auf unserem TS3 vorbei...tastybros.de... Ich würde dir natürlich auch eine Kleinlichkeit dafür geben. Share this post Link to post Share on other sites
Bortalo 0 Posted October 13, 2019 Hi, ich versuche den HarvestAmountMultiplier hoch zu setzten. Das Problem: es verändert sich nichts. Alle anderen Configurationen wirken nur der HarvestAmoundMultiplier nicht wenn ich es direkt in der ini ändere wird es im asc auch angezeigt mit dem Richtigen wert starte ich den Server ist er nicht hochgesetzt und nach dem Stoppen auch nicht mehr in der Configuration vorhanden kann mir jemand Helfen MFG Share this post Link to post Share on other sites
lolman2079 4 Posted October 13, 2019 (edited) Hi @Bortalo Du kannst über das ASC den HarvestAmountMultiplier hochsetzten. Dafür musst du nicht in die Config. Geh mal beim ASC auf Cluster Shards und stelle da den Wert ein. Schau auch das der Wert in der richtigen Config (GameUserSettings.ini) ist und auch unter den Klammern [ServerSettings] (siehe Anhang) EDIT: Es kann auch sein das du erstmal im ASC die Einstellung hinzufügen musst über das Plus (siehe Anhang). Da kannst du dann den harvestamountmultiplier einstellen und versuchen den Server zu starten. Edited October 13, 2019 by lolman2079 Share this post Link to post Share on other sites
kluffi 0 Posted October 15, 2019 Hallo Ich habe folgendes Problem: Mit Hilfe des ACS habe ich es endlich hingekriegt, dass meine 6 Clusters (3x2) laufen und ich auch auf den Freeport spawnen kann. Leider kann ich nicht in eine andere Region reisen. Die Grenzen sind blau, steht auch "Travelling to region C1" doch es geschieht nichts. Kann nur noch umherschauen, aber mich sonst nicht weiter bewegen. Vielen Dank für eure Hilfe. Gruss kluffi Share this post Link to post Share on other sites
lolman2079 4 Posted October 16, 2019 Hallo @Kluffi Hast du auch alle Ports geöffnet? Gruß lolman2079 1 Share this post Link to post Share on other sites
kluffi 0 Posted October 17, 2019 Quote Hallo Lolman2079 Ja habe ich. Ich hab den Fehler dank deiner Anleitung wie man einen Dedi mit ASC zum laufen kriegt gefunden. Ich habe nicht die WAN IP eingetragen sondern der Name meines NAS auf dem die 6 Server laufen. Nun habe ich die IP Adresse eingetragen und siehe da es läuft. Ich habe den Namen eingetragen, da es 1. bei ARK auch funktionierte und 2. ich keine fixe IP habe. Sobald der Provider das Gefühl hat mir eine neue IP zu geben, muss ich überall die neue eintragen. Nun warte ich auf die Fortsetzung deiner Anleitung, da ich es einfach nicht hinkriege die Cell und World Maps zum Laufen zu kriegen. Hoffe diese kommt bald Trotzdem vielen Dank für die Hilfe. Gruss kluffi Share this post Link to post Share on other sites
Cpt. BlackOrBit 0 Posted October 18, 2019 Hi, ich bin nochmal Bei mir läuft nun mein Server 7x7 Cluster aber die Spieler und ich hab Probleme, die Server (regionen zu wechseln). Die Server Grenzen sind blau. Sobald man versucht zu wechseln dann steht es da das wann auf den anderen Server wechselt aber es passiert nichts. Im gegenteil, man fliegt dann vom server. Wenn man die Server nicht per hand in die Steam Server list einträgt "Steam Rechtsklick und Server) dann kann man auch nicht auf den Server. Jemand ne idea ? Share this post Link to post Share on other sites
drachenherz2000 0 Posted October 28, 2019 Hallo zusammen, ich habe auch ein kleines bzw. Größeres Problem. Habe alles soweit am laufen. Mein Problem ist das meine Inseln teilweise zu tief im mehr sind. Als Beispiel, es fehlen Ufferböschungen und Bäumen ragen aus dem Wasser. Kann mir vieleicht jemand erklären was ich falsch gemacht habe. Als Info, habe bei Wasser die water Datei angewählt. Share this post Link to post Share on other sites
Asterote 0 Posted November 2, 2019 Project die ??? or not ?? Share this post Link to post Share on other sites
SparcMX 25 Posted November 2, 2019 No the project is not dead, I've been overseas working without access to ASC code, I'm back now though 2 Share this post Link to post Share on other sites
drachenherz2000 0 Posted November 3, 2019 Was gut und wichtig wäre, ist das mann vieleicht noch Backups und save Dateien aufrufen und Einspielen könnte oder Backups erstellen könnte. Zudem wäre es gut das man alle Einstellungen wie Tag und Nacht, Hunger und Wasser usw. Einstellen könnte, ohne die game.ini oder gameuserseting bearbeiten muss Share this post Link to post Share on other sites
Dprince 1 Posted November 6, 2019 Hi amazing work i want to say first off, so thank you for all your work. my only issue with it is when a server crash's there is no auto restart, would be a nice feature, only if there is a crash though. Share this post Link to post Share on other sites
drachenherz2000 0 Posted November 6, 2019 Kann mir jemand weiter helfen? Wie Kann man ein Backup oder einen save Datei Aufrufen um einen früheren Spielstand wieder herzustellen? Wäre für jede Hilfe dankbar Share this post Link to post Share on other sites
BurnerZA 0 Posted November 8, 2019 Great work on the program. I run a private 2x2 for our clan and using ASC has made this a breeze. When i want to start the tilemap server it states that Redis is not running. When i click on Start Redis it shows green but as soon as i close the small window its red again. Any suggestions on this. Also any way to increase loot/treasure quality would be an awesome addition. Share this post Link to post Share on other sites
brianclough_ie 0 Posted November 23, 2019 Great program, starting to get to grips with it now. Starting to push out the settings for hosting on multiple machines. However, when you run the wizard, and import your existing .JSON file, on whichever machine you are installing it on. It then sets up the four ports for you each time. This strikes me as being a little unnecessary really as if you have already setup your JSON file with exactly the ports that you want each server instance you use, it shouldn't really be reassigning those ports again. I end up having to change them back in the program again to what I want them to be. Maybe a "skip this step" feature would be useful? Just my thought anyway. Kind Regards, Brian Share this post Link to post Share on other sites
warrl0rd 0 Posted November 25, 2019 Can XBOX players connect to this server? Share this post Link to post Share on other sites
bluethunder1080 0 Posted December 4, 2019 still somewhat new to ASC and atlas, but i am having an issue i created a world with a 4x4 setup and left the default map configuration as is (literally what it auto-generated) and left the spawn area alone as well (Freeport). currently, all 4 spawn islands keep spawning with missing terrain and you pretty much fall through. there are plants/grass/trees where the terrain should be. Is this an issue with ASC or with atlas itself and any ideas on what would be best to fix it? thanks youtube video attached so you can see what i mean https://youtu.be/UbvzI-U5PEo Share this post Link to post Share on other sites
BentoFox 0 Posted December 7, 2019 On 11/8/2019 at 7:44 PM, BurnerZA said: When i click on Start Redis it shows green but as soon as i close the small window its red again. @BurnerZA Probably a month too late, but the problem is that ASC corrupts your "ServerGrid.ServerOnly.json" when you save or export on a clean server. When you open that file you'll notice that at the end it says: "DatabaseConnections": null Replace that with the code below and it will work. (change pw / port where applicable) "DatabaseConnections": [ { "Name": "Default", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "TribeDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "TravelDataDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "TerritoryDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "LogDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" } ] Share this post Link to post Share on other sites
BentoFox 0 Posted December 7, 2019 (edited) @SparcMX Hey there, I've been trying for hours to get the maps to work but they end up grey no matter what I do. One thing I noticed is that the server windows show the seamlessIP as the local loopback. I've read elsewhere that this should be set to the public IP of the map image hosting machine but I don't have a static IPv4 and rely on DynDNS. That aside though, I've found no setting to actually change this IP as the actual server start command is not exposed. Is there currently a way to overwrite the SeamlessIP parameter from the server start command with a DNS address? Or is it fine being set to localhost if there's only one hosting PC? Edited December 8, 2019 by BentoFox Share this post Link to post Share on other sites
Homefry 0 Posted December 11, 2019 So I've put up a 2x2 with ASC. I can see the a1 server, me and others can log into it. But for some reason A2, B1 and B2 aren't showing on the list. I can travel to them via boat. But if I log out I can't get back into the server because the other's aren't showing. Do I have an option set wrong somewhere? Share this post Link to post Share on other sites
AkenoHimejima 0 Posted December 22, 2019 https://i.imgur.com/DGE7WO1.png What to do they server server unique ID but i generated a new ID Share this post Link to post Share on other sites
AkenoHimejima 0 Posted December 22, 2019 13 minutes ago, AkenoHimejima said: https://i.imgur.com/DGE7WO1.png What to do they server server unique ID but i generated a new ID Got solved with few settings Changed Unique ID and added "DatabaseConnections": [ { "Name": "Default", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "TribeDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "TravelDataDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "TerritoryDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" }, { "Name": "LogDB", "URL": "127.0.0.1", "Port": 6379, "Password": "foobared" } ] Share this post Link to post Share on other sites
AkenoHimejima 0 Posted December 22, 2019 i cant find any info on splitting up a cluster between 2 systems? could anyone wanna help me out with this i wanna Split a 2x2 map between 2 Servers as the memory of a single server is kinda low i wanna make machine 1 do 2 Maps 0.0 and 0.1 Machine 2 do 2 Maps 1.0 and 1.1 How to connect machine 2 to 1 and how to setup ServerGrid files? Share this post Link to post Share on other sites